In Stock
Color
#808080Quantity
1 20kg/pailSAB®Crystal Coat CP 212
is a one
component, capillary crystalline, waterproof coating, which waterproofs
concrete structures by forming insoluble crystals in concrete capillaries. SAB®Crystal
Coat CP 212 waterproofs both from
negative and positive direction and is ideally suited for basement water
proofing. SAB®Crystal Coat CP 212 cures
to a hard-robust abrasion resistant coating.
Usage:
Water
Retaining Structures such as
water tanks and swimming pools, reservoirs, dams, canals, sewerage & water
treatment works and concrete pipes.
• Negative
and Positive waterproofing
• Replaces
ineffective sheet membranes.
Seals shrinkage cracks up to 1/64” (0.4 mm) width. Reduced chloride permeability.
• Protect
concrete and reinforcement from corrosion due to water born substances like
chlorides and sulphates.
• Easy
to apply product and Excellent adhesion
• Non-toxic
and suitable in potable water containment.
• Negligible
interference with water reducers & plasticizers.
• Negligible
effect/influence on slump and air entrainment.
• Impervious
to physical damage and deterioration
• Non-toxic,
inorganic, zero VOC (0%)
• Less
costly than traditional methods of waterproofing.
• Economic
efficiency
|
Component |
Single |
|
Color / Form |
Grey Powder |
|
Bulk Density |
Approx. 1.5 kg/m3 |
|
Application Temperature |
5°C to 45°C |
|
Mixing Ratio |
20 Kg: 6 Litres of water |
|
Pot life |
2 to 3 hours |
|
Setting time |
3 hours approx. |
(Typical Properties tested at 25°C under laboratory conditions)
(The properties shown above
were obtained under laboratory conditions).
All values given are
subject to 10% tolerance
PACKAGING
20kg Bag
25kg Plastic Pail
COVERAGE
Apply in 2 to 3 coats to achieve an overall thickness
of 1.5-2.0mm with an overall material consumption of 2.0-3.0kg/m2.
6m to 10m total coverage.
Do not accept the product if you find the packaging is damaged
 214.jpg)
